P081E Audi Auto Trouble Code

Parts or components should not be replaced with reference to only a P081E Audi DTC. The vehicle service manual should be consulted for more information on possible causes of the fault, along with required testing.

Evaporative emissions systems test for a leak in the fuel tank and associated hoses. To perform the test, the computer pulls a vacuum and checks to see if the vacuum holds. Each car maker uses a different techniques to check, but most often it's some type of fuel tank pressure sensor.

P081E Audi Possible Solution:

Air Conditioning Pressure Sensor (ACP) Insufficient Pressure Change Each time the A/C clutch engages, the PCM is looking for a pressure change in the refrigerant. If the change in pressure is outside of the calibration the DTC will set. A/C system mechanical failure Open ACP or VREF circuit A/C sensor damaged A/C system electrical failure A/C clutch always engaged Verify A/C system function, including refrigerant charge.

Audi P081E Engine Trouble Code Description For All Models :

P081E meaning and repair processes are the same for all Audi models.

After understanding P081E Audi error code for your Audi car, now you can repair yourself.
P081E Audi Trouble Repair Process:

P081E Audi code shows that location the body harness connector, located in and around the left hand kick panel area or inside the IP (consult a shop manual for location). Water can leak into the connector from clogged sunroof drains, A-pillar leaks, or windshield or cowling leaks.

p081e is a very common fault code for the thermostat. If you have this fault it will need to be replaced. I would start with that repair, clear the faults and perform a 30 minute battery reset(disconnect the negative cable off of the battery) and retest the vehicle.

Code Search

Please fill the search bar to find Auto Trouble Code meaning.

Example: 0120

Share This P081E Audi Page:
FB TW G+